A - SINGLE GUN SET

• Place Rack-It on ATV tubular rack (bars of either the front or rear rack) and secure with U-Bolts provided. U-Bolts should fit around the bar and plates over the flat part of the foot of the Rack-It. Tighten to hold securely in place.

• Using 1/4" screws and nuts provided, attach Rack-It back to back and follow the mounting instructions for the single gun set.

• Hold Rack-It gun rack to side of Cajun Dri-Stor (do not install on hinge side) approximately 25 inches apart and with a sharp instrument or drill bit, mark spots to drill holes. With a 1/4" drill bit drill 2 holes for each rack. Attach racks with the 1/4" screws and nuts provided. NOTE: Fender washers should be inside Cajun Dri-Stor next to the nut.