Home
About
CDS
Online
Store
ATV
Accessories
Mudder
Mucker
Video Tapes
Wheels,
Tires and
Performance Parts
Clubs
Events
New
Products
Up
Dates
Installation
Instructions
Free
Catalog
Other
Links
Contact
Us
| Installation Instructions
| CAJUN DRI-STOR
A - ATV RACK
- Set Dri-Stor on desired rack (for quick and easy installation, remove rack and use as a template).
- Select 2 bars for securing.
- Loop the clip around the desired bar and use as a template for your drill.
- Drill 1/4" holes.
- Secure with hardware provided as shown for each clip (See Figure 2) and re-install rack to ATV. It may be necessary to re-install that ATV Rack before installing the Dry-Stor. Figure 1 shows a perfect installation.
- Your ATV Rack may vary from this design and construction. If in doubt, see your local dealer.
CAUTION: Be sure to keep face and eyes clear when installing bungee cords.
B - SEALING TAPE See Figure 3
- Proper positioning of the tape will seal the lid against the raised lip of the Dri-Stor.
- Cut the foam sticky back tape so that it will fit on the inside of the lid.
- The bungee cord fits in the groove across the top of the box and attaches in the eyes on the ends.
- When the lid is shut and bungee is used across the lid in the proper manner, the top and bottom conform to make a seal.
CAUTION: Be sure to keep face and eyes clear when installing bungee cords.
|
|
|
